POWERSET SERIES TOTAL STATIONS
 


      SET500 AND SET600 TOTAL STATIONS

                                                           

HARDWARE Highly Reliable, Durable and User-Friendly Hardware

POWER [Sighting Performance]
Miniaturized Telescope Allows Quick, Accurate Sightings

To simplify operation, we developed a miniaturized telescope specifically for the POWERSET Series. Sighting targets is easier than ever.

To facillitate quick and accurate sighting, the focusing ring, fine motion screwe and clamps have been coated with durable rubber. The focusing ring and fine motion screw have been designed to rotate at two speeds for grater control: fine and coarse.
Size of the telescope (without peep sights):
L165 x W62 x H80mm (L6.5 x W2.5 x H3.2 in.)
Co-axial Clamp and Fine Motion Screw for Quick Sighting
For precise adjustment, the diameter of the fine motion ring has been increased to 1.14in.

 

SOFTWARE
Integrated SDR Electronic Field Book And DR DOS operating functions

Power [High-Speed Processing]   
Large Internal Memory Provides
Rapid Processing of Surveying Data

The processing speed of measured data has a dramatic effect on on-site efficiency. The POWERSET Series combines a large internal memory with memory cards to ensure efficient measurement and storage of data. The large internal memory can store and quickly process a large amount of data, and the popular non-contact memory cards can also be used for fast, reliable back-up, transfer and storage of measured data.
Recorded data is automatically time-stamped for managing records and productivity. Stored data can be efficiently transferred to a PC for further processing.
128 K byte Internal Memory (Storage Capacity: Approximately 1,300 Points)

Measured data is stored and processed in the internal memory. Since the card is not accessed each time a measurement is performed, the processing speed is maximized.

 Direct Data Output from the Internal Memory

The interface is compatible with both RS-232C and Centronics. Data can be transferred to computers and printers using optional cables.
Water-Proof, Dust-Proof Memory Cards

Three memory card sizes are available-128K byte SDC5 (about 2,000 points*, supplied as standard), 256K byte SDC6 (about 4,000 points*), and 512 K byte SDC8 (about 8,000 points*).
     When using mutiple cards, the storage capacity is practically limitless. The cards can be sent one at a time to the office for processing, and can then be loaded with data handling more flexible and increase efficiency.
     Because the data is accessed using a non-contact magnetic coupling system, the cards have no metallic connectors, which can be prone to corrode and wear failure. They are also water-and dust-proof** and will effectively protect your valuable data from contact faults caused by water, oil, dirt, finger prints, static electricity, etc. Since they are resistant to falls, shocks and bending, they can be used even in unfavorable surveying environments.		 Communication System
*When point numbers are in four digits.
**Degree of protection against water: protected against splashing water as defined by JIS Class IPX4 in compliance with IEC Standard Class 

 




 

 

                                                                    


[Home]  [Product]  [Promotion]  [Survey Contractor]  [Contact Us]